Quality of Service (QoS) Commands
479
ProSafe Managed Switch
show access-lists
This command displays IP ACLs, IPv6 ACLs, and MAC access control lists information for a
designated interface and direction.
Format show access-lists interface <unit/slot/port> [in|out]
Mode
Term Definition
Rule Number
The number identifier for each rule that is defined for the IP ACL.
Action
The action associated with each rule. The possible values are Permit or Deny.
Match All
Indicates whether this access list applies to every packet. Possible values are True or
False.
Protocol
The protocol to filter for this rule.
Source IP
Address
The source IP address for this rule.
Source IP Mask
The source IP Mask for this rule.
Source L4 Port
Keyword
The source port for this rule.
Destination IP
Address
The destination IP address for this rule.
Destination IP
Mask
The destination IP Mask for this rule.
Destination L4
Port Keyword
The destination port for this rule.
IP DSCP
The value specified for IP DSCP.
IP Precedence
The value specified IP Precedence.
IP TOS
The value specified for IP TOS.
Log
Displays when you enable logging for the rule.
Assign Queue
The queue identifier to which packets matching this rule are assigned.
Mirror Interface
The unit/slot/port to which packets matching this rule are copied.
Redirect
Interface
The unit/slot/port to which packets matching this rule are forwarded.
Time Range
Name
Displays the name of the time-range if the ACL rule has referenced a time range.
Rule Status
Status (Active/Inactive) of the ACL rule.
Privileged EXEC
To Next Page
Loading...
Need help?
General