NETGEAR ProSAFE M7100-24X - Chapter 2 Switching Commands

20
2
2. Switching Commands
This chapter describes the switching commands available in the managed switch CLI.
This chapter contains the following sections:
• Port Configuration Commands
• Loopback Interface Commands
• Spanning Tree Protocol (STP) Commands
• VLAN Commands
• Double VLAN Commands
• Voice VLAN Commands
• Provisioning (IEEE 802.1p) Commands
• Protected Ports Commands
• Private VLAN
• GARP Commands
• GVRP Commands
• GMRP Commands
• Port-Based Network Access Control Commands
• 802.1X Supplicant Commands
• Storm-Control Commands
• Flow Control Commands
• Port Mirroring
• Static MAC Filtering
• DHCP L2 Relay Agent Commands
• DHCP Client Commands
• DHCP Snooping Configuration Commands
• Dynamic ARP Inspection Commands
• IGMP Snooping Configuration Commands
• IGMP Snooping Querier Commands
• MLD Snooping Commands
• MLD Snooping Querier Commands