NETGEAR ProSAFE M7100-24X User Manual

Log Messages
704
ProSafe Managed Switch
Management
Table 10. TACACS+ Log Messages
Component Message Cause
TACACS+
TACACS+: authentication error, no server
to contact
TACACS+ request needed, but no servers
are configured.
TACACS+
TACACS+: connection failed to server
x.x.x.x
TACACS+ request sent to server x.x.x.x but
no response was received.
TACACS+
TACACS+: no key configured to encrypt
packet for server x.x.x.x
No key configured for the specified server.
TACACS+
TACACS+: received invalid packet type
from server.
Received packet type that is not supported.
TACACS+
TACACS+: invalid major version in
received packet.
Major version mismatch.
TACACS+
TACACS+: invalid minor version in
received packet.
Minor version mismatch.
Table 11. LLDP Log Message
Component Message Cause
LLDP
lldpTask(): invalid message type:xx.
xxxxxx:xx
Unsupported LLDP packet received.
Table 12. SNTP Log Message
Component Message Cause
SNTP
SNTP: system clock synchronized on %s
UTC
Indicates that SNTP has successfully
synchronized the time of the box with the
server.
Table 13. SNMP Log Message
Component Message Cause
SNMP
EDB Callback: Unit Join: x. A new unit has joined the stack.

NETGEAR ProSAFE M7100-24X Specifications

General

Brand	NETGEAR
Model	ProSAFE M7100-24X
Category	Switch
Language	English