Management Commands
628
ProSafe Managed Switch
no sshcon maxsessions
Use this command to set the maximum number of allowed SSH connection sessions to the
default value.
Format no sshcon maxsessions
Mode
sshcon timeout
Use this command to set the SSH connection session timeout value, in minutes. A session is
active as long as the session has been idle for the value set. The time is a decimal value from
1 to 160.
Changing the timeout value for active sessions does not become effective until the session is
re accessed. Also, any keystroke activates the new timeout duration.
Default
Format sshcon timeout <1-160>
Mode
no sshcon timeout
Use this command to set the SSH connection session timeout value, in minutes, to the
default.
Changing the timeout value for active sessions does not become effective until the session is
re accessed. Also, any keystroke activates the new timeout duration.
Format no sshcon timeout
Mode
show ip ssh
Use this command to display the ssh settings.
Format show ip ssh
Mode
Privileged EXEC
5
Privileged EXEC
Privileged EXEC
Privileged EXEC
Term Definition
Administrative
Mode
This field indicates whether the administrative mode of SSH is enabled or disabled.
Protocol Level
The protocol level may have the values of version 1, version 2 or both versions 1 and
version 2.
SSH Sessions
Currently Active
The number of SSH sessions currently active.
To Next Page
Loading...
Need help?
General