DiffServ Admin mode
Class Table Size
Current /Max
Class Rule Table Size
Current /Max
Policy Table Size
Current /Max
Policy Instance Table
Size Current /Max
Policy Attribute Table
Size Current /Max
Service Table Size
Current /Max
Quality of Service (QoS) Commands
465
ProSafe Managed Switch
show policy-map
This command displays all configuration information for the specified policy. The
<policyname> is the name of an existing DiffServ policy.
Format show policy-map [policyname]
Mode
If the Policy Name is specified the following fields are displayed:
Policy Name
Policy Type
The following information is repeated for each class associated with this policy (only those
policy attributes actually configured are displayed):
Term Definition
The current value of the DiffServ administrative mode.
The current number of entries (rows) and the maximum allowed entries (rows) in
the Class Table.
The current number of entries (rows) and the maximum allowed entries (rows) in
the Class Rule Table.
The current number of entries (rows) and the maximum allowed entries (rows) in
the Policy Table.
Current number of entries (rows) 
in
the Policy Instance Table.
Current number of entries (rows) and the maximum allowed entries (rows) in the
Policy Attribute Table.
The current number of entries (rows) i and the maximum allowed entries (rows) in
the Service Table.
Privileged EXEC
Term Definition
The name of this policy.
The policy type (Only inbound policy definitions are supported for this platform.)
Term Definition
Assign Queue
Directs traffic stream to the specified QoS queue. This allows a traffic classifier to specify
which one of the supported hardware queues are used for handling packets belonging to
the class.
Class Name
The name of this class.
Committed
Burst Size (KB)
The committed burst size, used in simple policing.
Committed Rate
(Kbps)
The committed rate, used in simple policing,
To Next Page
Loading...
Need help?
General