NETGEAR ProSAFE M7100-24X - Show Mac Address-Table Multicast Filtering; Show Domain-Name

Management Commands
659
ProSafe Managed Switch
same Multicast Group address within the max-response-time, only the first response is
forwarded to the query and others are suppressed at the switch.
Default
Format
set igmp report-suppression <1-4093>
Mode
no set igmp report-suppression
Use this command to restore the system default.
Format
no set igmp report-suppression
Mode
show mac address-table multicast filtering
Use this command to display the multicast filtering details for a given VLAN.
Format
show mac address-table multicast filtering
Mode
The following shows example CLI display output for the command.
(netgear switch) #show mac address-table multicast filtering 1
VLAN-ID....... 1
Mode.......... Forward-Forbidden-Unregistered
show domain-name
This command displays the configured domain-name.
Format show domain-name
Mode
Example:
(switch) #
(switch) #show domain-name
Domain : Enable
Domain-name :abc
Disabled
VLAN Config
VLAN Config
Privileged EXEC
Parameter Description
vlan-id A valid VLAN ID
mode The filtering mode
Privileged EXEC