NETGEAR ProSAFE M7100-24X User Manual

IP Multicast Commands
321
ProSafe Managed Switch
If you use the detail parameter, the command displays the following fields:
Source IP
Group IP
Expiry Time
Up Time
RPF Neighbor
Flags
If you use the summary parameter, the command displays the following fields:
Source IP
Group IP
Protocol
Incoming
Interface
Outgoing
Interface List
show ip mcast mroute group
This command displays the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the
entries in the multicast mroute table containing the given <groupipaddr>.
Format show ip mcast mroute group <groupipaddr> {detail |summary}
Modes
• Privileged EXEC
• User EXEC
Source IP
Group IP
Protocol
Incoming
Interface
Outgoing
Interface List
Term Definition
The IP address of the multicast data source.
The IP address of the destination of the multicast packet.
The time of expiry of this entry in seconds.
The time elapsed since the entry was created in seconds.
The IP address of the RPF neighbor.
The flags associated with this entry.
Term Definition
The IP address of the multicast data source.
The IP address of the destination of the multicast packet.
The multicast routing protocol by which the entry was created.
The interface on which the packet for the source/group
arrives.
The list of outgoing interfaces on which the packet
is forwarded.
Term Definition
The IP address of the multicast data source.
The IP address of the destination of the multicast packet.
The multicast routing protocol by which this entry was created.
The interface on which the packet for this group arrives.
The list of outgoing interfaces on which this packet is forwarded.

NETGEAR ProSAFE M7100-24X Specifications

General

Brand	NETGEAR
Model	ProSAFE M7100-24X
Category	Switch
Language	English