NETGEAR ProSAFE M7100-24X User Manual

Utility Commands
610
ProSafe Managed Switch
no udld enable
This command disables udld globally on the switch.
Format no udld enable
Mode
udld message time
This command configures the interval between UDLD probe messages on ports that are in
the advertisement phase. The range is from 7 to 90 seconds.
Default
Format udld message time <interval>
Mode
udld timeout interval
This command configures the time interval after which UDLD link is considered to be
unidirectional. The range is from 5 to 60 seconds.
Default
Format udld timeout interval <interval>
Mode
udld enable
This command enables UDLD on the specified interface.
Default
Format udld enable
Mode
no udld enable
This command disables udld on the specified interface.
Format no udld enable
Mode
Global Config
15
Global Config
5
Global Config
disabled
Interface Config
Interface Config

NETGEAR ProSAFE M7100-24X Specifications

General

Brand	NETGEAR
Model	ProSAFE M7100-24X
Category	Switch
Language	English