• None
• Log
• SNMP Trap
• Log and SNMP Trap
Utility Commands
607
ProSafe Managed Switch
no rmon event
This command deletes the rmon event entry.
Format no rmon event <event number>
Mode
rmon collection history
This command sets the history control parameters of the RMON historyControl mib group.
Format rmon collection history <index number> [buckets|interval|owner]
Mode
no rmon collection history
This command deletes the history control group entry with the specified index number.
Format no rmon collection history <index number>
Mode
show rmon
This command displays the entries in the RMON alarm table.
Format show rmon {alarms | alarm <alarm-index>}
Mode
show rmon collection history
This command displays the entries in the RMON history control table.
Format show rmon collection history
Mode
Parameter Description
Event Number Event identifier
Event Type The type of notification that the probe will make about the event. Possible values are:
Global Config
Interface Config
Interface Config
Privileged Exec
Privileged Exec
To Next Page
Loading...
Need help?
General