Switching Commands
26
ProSafe Managed Switch
show port protocol
This command displays the Protocol-Based VLAN information for either the entire system, or
for the indicated group.
Format show port protocol {<groupid> | all}
Mode
show port description
This command displays the port description for every port.
Format show port description <unit/slot/port>
Mode
Interface
Description
show port status
This command displays the Protocol-Based VLAN information for either the entire system, or
for the indicated group.
Format show port status {<unit/slot/port> | all}
Mode
Link Status
The Link is up or down.
Link Trap
This object determines whether or not to send a trap when link status changes. The
factory default is enabled.
LACP Mode
LACP is enabled or disabled on this port.
Privileged EXEC
Term Definition
Group Name
The group name of an entry in the Protocol-based VLAN table.
Group ID
The group identifier of the protocol group.
Protocol(s)
The type of protocol(s) for this group.
VLAN
The VLAN associated with this Protocol Group.
Interface(s)
Lists the unit/slot/port interface(s) that are associated with this Protocol Group.
Privileged EXEC
Term Definition
Valid slot and port number separated by forward slashes
Shows the port description configured via the “description” command
Privileged EXEC
Term Definition
To Next Page
Loading...
Need help?
General