IPv6 Multicast Commands
435
ProSafe Managed Switch
Example: The following shows example CLI display output for the command.
(Switch) #show ipv6 mld-proxy
Interface Index............................................. 1/0/3
Admin Mode................................................ Enable
Operational Mode......................................... Enable
Version......................................................... 3
Num of Multicast Groups............................. 0
Unsolicited Report Interval.......................... 1
Querier IP Address on Proxy Interface........ fe80::1:2:5
Older Version 1 Querier Timeout................ 00:00:00
Proxy Start Frequency.................................
show ipv6 mld-proxy interface
This command displays a detailed list of the host interface status parameters. It displays the
following parameters only when you enable MLD-Proxy.
Format show ipv6 mld-proxy interface
Modes
• Privileged EXEC
• User EXEC
Interface Index
The column headings of the table associated with the interface are as follows:
Number of Multicast Groups
The number of multicast groups that are associated with the MLD-Proxy
interface.
Unsolicited Report Interval
The time interval at which the MLD-Proxy interface sends unsolicited group
membership report.
Querier IP Address on Proxy
Interface
The IP address of the Querier, if any, in the network attached to the
upstream interface (MLD-Proxy interface).
Older Version 1 Querier
Timeout
The interval used to timeout the older version 1 queriers.
Proxy Start Frequency
The number of times the MLD-Proxy has been stopped and started.
Term Definition
The unit/slot/port of the MLD-proxy.
Term Definition
Ver
The MLD version.
Query Rcvd
Number of MLD queries received.
Report Rcvd
Number of MLD reports received.
Report Sent
Number of MLD reports sent.
Field Description
To Next Page
Loading...
Need help?
General