MAC Address
Type
Component
Description
Interfaces
Forwarding
Interfaces
Switching Commands
201
ProSafe Managed Switch
show mac-address-table stats
This command displays the Multicast Forwarding Database (MFDB) statistics.
Format show mac-address-table stats
Mode
Max MFDB
Table Entries
Most MFDB
Entries Since
Last Reset
Current Entries
ISDP Commands
This section describes the commands you use to configure the industry standard Discovery
Protocol (ISDP).
isdp run
This command enables ISDP on the switch.
Default
Format isdp run
Mode
Term Definition
A multicast MAC address for which the switch has forwarding and or filtering information.
The format is two-digit hexadecimal numbers separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as a MAC
address and VLAN ID combination of 8 bytes.
The type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
The component that is responsible for this entry in the Multicast Forwarding Database.
Possible values are IGMP Snooping, GMRP, and Static Filtering.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
The resultant forwarding list is derived from combining all the component’s forwarding
interfaces and removing the interfaces that are listed as the static filtering interfaces.
Privileged EXEC
Term Definition
The total number of entries that can possibly be in the Multicast Forwarding Database
table.
The largest number of entries that have been present in the Multicast Forwarding
Database table. This value is also known as the MFDB high-water mark.
The current number of entries in the MFDB.
Enabled
Global Config
To Next Page
Loading...
Need help?
General