Utility Commands
577
ProSafe Managed Switch
debug arp
Use this command to enable ARP debug protocol messages.
Default
Format debug arp
Mode
no debug arp
Use this command to disable ARP debug protocol messages.
Format no debug arp
Mode
debug auto-voip
Use this command to enable Auto VOIP debug messages. Use the optional parameters to
trace H323, SCCP, or SIP packets respectively.
Default
Format debug auto-voip [H323|SCCP|SIP]
Mode
no debug auto-voip
Use this command to disable Auto VOIP debug messages.
Format no debug auto-voip
Mode
debug clear
This command disables all previously enabled “debug” traces.
Default
Format debug clear
Mode
debug console
This command enables the display of “debug” trace output on the login session in which it is
executed. Debug console display must be enabled in order to view any trace output. The
output of debug trace commands will appear on all login sessions for which debug console
disabled
Privileged EXEC
Privileged EXEC
disabled
Privileged EXEC
Privileged EXEC
disabled
Privileged EXEC
To Next Page
Loading...
Need help?
General