NETGEAR ProSAFE M7100-24X User Manual

IP Multicast Commands
338
ProSafe Managed Switch
Group Mask 255.255.0.0
Origin Static
Expiry Time (hh:mm:ss) NA
Internet Group Message Protocol (IGMP) Commands
This section describes the commands you use to view and configure IGMP settings.
ip igmp
This command sets the administrative mode of IGMP in the system to active.
Default
Format ip igmp
Modes
• Global Config
• Interface Config
no ip igmp
This command sets the administrative mode of IGMP in the system to inactive.
Format no ip igmp
Modes
• Global Config
• Interface Config
ip igmp version
This command configures the version of IGMP for an interface. The value for <version> is
either 1, 2 or 3.
Default
Format ip igmp version <version>
Modes
no ip igmp version
This command resets the version of IGMP to the default value
.
Format no ip igmp version
Modes
disabled
3
Interface Config
Interface Config

NETGEAR ProSAFE M7100-24X Specifications

General

Brand	NETGEAR
Model	ProSAFE M7100-24X
Category	Switch
Language	English