Routing Commands
293
ProSafe Managed Switch
show ip ospf interface stats
This command displays the statistics for a specific interface. The information below will only
be displayed if OSPF is enabled.
Format show ip ospf interface stats <unit/slot/port>
Modes
• Privileged EXEC
• User EXEC
Retransmit
Interval
A number representing the OSPF Retransmit Interval for the specified interface.
Retransmit
Delay Interval
A number representing the OSPF Transit Delay for the specified interface.
LSA Ack
Interval
A number representing the OSPF LSA Acknowledgment Interval for the specified
interface.
Term Definition
OSPF Area ID
The area id of this OSPF interface.
Area Border
Router Count
The total number of area border routers reachable within this area. This is initially zero,
and is calculated in each SPF pass.
AS Border
Router Count
The total number of Autonomous System border routers reachable within this area.
Area LSA Count
The total number of link-state advertisements in this area's link-state database, excluding
AS External LSAs.
IP Address
The IP address associated with this OSPF interface.
OSPF Interface
Events
The number of times the specified OSPF interface has changed its state, or an error has
occurred.
Virtual Events
The number of state changes or errors that occurred on this virtual link.
Neighbor
Events
The number of times this neighbor relationship has changed state, or an error has
occurred.
External LSA
Count
The number of external (LS type 5) link-state advertisements in the link-state database.
Sent Packets
The number of OSPF packets transmitted on the interface.
Received
Packets
The number of valid OSPF packets received on the interface.
Discards
The number of received OSPF packets discarded because of an error in the packet or an
error in processing the packet.
Bad Version
The number of received OSPF packets whose version field in the OSPF header does not
match the version of the OSPF process handling the packet.
Term Definition
To Next Page
Loading...
Need help?
General