NETGEAR ProSAFE M7100-24X - DHCP Client Commands; Show Dhcp L2 Relay Agent-Option Vlan; Dhcp Client Vendor-ID-Option

Switching Commands
129
ProSafe Managed Switch
show dhcp l2relay agent-option vlan
Use this command to display the DHCP L2 Relay Option-82 configuration specific to VLAN.
Format show dhcp l2relay agent-option vlan vlan-range
Mode
Example: The following shows example CLI display output for the command.
(switch) #show dhcp l2relay agent-option vlan 5-10
DHCP L2 Relay is Enabled.
VLAN Id L2 Relay CircuitId RemoteId
--------- ---------- ----------- ------------
5 Enabled Enabled --NULL—
6 Enabled Enabled netgear
7 Enabled Disabled --NULL—
8 Enabled Disabled --NULL—
9 Enabled Disabled --NULL—
10 Enabled Disabled --NULL--
DHCP Client Commands
DHCP Client can include vendor and configuration information in DHCP client requests
relayed to a DHCP server. This information is included in DHCP Option 60, Vendor Class
Identifier. The information is a string of 128 octets.
dhcp client vendor-id-option
Use this command to enable the inclusion of DHCP Option-60, Vendor Class Identifier
included in the requests transmitted to the DHCP server by the DHCP client operating in the
switch.
Format dhcp client vendor-id-option
Mode
no dhcp client vendor-id-option
Use this command to disable the inclusion of DHCP Option-60, Vendor Class Identifier
included in the requests transmitted to the DHCP server by the DHCP client operating in the
switch.
Format no dhcp client vendor-id-option
Mode
Privileged EXEC
Global Config
Global Config