Multicast VLAN Registration (MVR)
215
ProSafe Managed Switch
(switch)#show mvr interface 1/0/9
Type: RECEIVER Status: ACTIVE Immediate Leave: DISABLED
(switch)#show mvr interface Fa1/0/23 members
235.0.0.1 STATIC ACTIVE
(switch)#show mvr interface Fa1/0/23 members vlan 12
235.0.0.1 STATIC ACTIVE
235.1.1.1 STATIC ACTIVE
show mvr traffic
This command displays global MVR statistics.
The following table explains the output parameters.
Example:
(switch)#show mvr traffic
IGMP Query Received…........................................ 2
IGMP Report V1 Received….................................... 0
IGMP Report V2 Received….................................... 3
IGMP Leave Received…........................................ 0
IGMP Query Transmitted…..................................... 2
Format show mvr traffic
Mode Privileged EXEC
Term Definition
IGMP Query Received Number of received IGMP queries
IGMP Report V1 Received Number of received IGMP reports V1
IGMP Report V2 Received Number of received IGMP reports V2
IGMP Leave Received Number of received IGMP leaves
IGMP Query Transmitted Number of transmitted IGMP queries
IGMP Report V1 Transmitted Number of transmitted IGMP reports V1
IGMP Report V2 Transmitted Number of transmitted IGMP reports V2
IGMP Leave Transmitted Number of transmitted IGMP leaves
IGMP Packet Receive Failures Number of failures on receiving the IGMP packets
IGMP Packet Transmit Failures Number of failures on transmitting the IGMP packets
To Next Page
Loading...
Need help?
General