NETGEAR ProSAFE M7100-24X - Show Vlan

Switching Commands
69
ProSafe Managed Switch
private-vlan
This command is used to configure the private VLANs and to configure the association
between the primary private VLAN and secondary VLANs.
Format private-vlan {association [add | remove] secondary-vlan-list |
community | isolated | primary}
Mode
association
secondary-vlan-list
community
isolated
primary
no private-vlan
This command is used to restore normal VLAN configuration.
Format no private-vlan {association}
Mode
vlan
Use this command to enter the private vlan configuration. The VLAN range is 1-4094.
Format
vlan <vlan-list>
Mode
show vlan
This command displays information about the configured private VLANs including primary
and secondary VLAN IDs, type (community, isolated, or primary) and the ports that belong to
a private VLAN.
Format show vlan private-vlan [type]
Mode
• Priviliged EXEC
• User EXEC
VLAN Config
Term Definition
Associates the primary and secondary VLAN.
A list of secondary VLANs to be mapped to a primary VLAN.
Designates a VLAN as a community VLAN.
Designates a VLAN as the isolated VLAN.
Designates a VLAN as the primary VLAN.
VLAN Config
Global Config