Switching Commands
51
ProSafe Managed Switch
assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged
frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format no vlan port acceptframe all
Mode
vlan port ingressfilter all
This command enables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface
are admitted and forwarded to ports that are members of that VLAN.
Default
Format vlan port ingressfilter all
Mode
no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface
are admitted and forwarded to ports that are members of that VLAN.
Format no vlan port ingressfilter all
Mode
vlan port pvid all
This command changes the VLAN ID for all interface.
Default
Format vlan port pvid all <1-4093>
Mode
no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
Format no vlan port pvid all
Mode
Global Config
disabled
Global Config
Global Config
1
Global Config
Global Config
To Next Page
Loading...
Need help?
General