NETGEAR ProSAFE M7100-24X - Area Nssa No-Redistribute (Ospf); Area Nssa No-Summary (Ospf); Area Nssa Translator-Role (Ospf)

Routing Commands
262
ProSafe Managed Switch
no area nssa default-info-originate (OSPF)
This command disables the default route advertised into the NSSA.
Format no area <areaid> nssa default-info-originate [<metric>] [{comparable
| non-comparable}]
Mode
area nssa no-redistribute (OSPF)
This command configures the NSSA Area Border router (ABR) so that learned external
routes will not be redistributed to the NSSA.
Format area <areaid> nssa no-redistribute
Mode
no area nssa no-redistribute (OSPF)
This command disables the NSSA ABR so that learned external routes are redistributed to
the NSSA.
Format no area <areaid> nssa no-redistribute
Mode
area nssa no-summary (OSPF)
This command configures the NSSA so that summary LSAs are not advertised into the
NSSA.
Format area <areaid> nssa no-summary
Mode
no area nssa no-summary (OSPF)
This command disables nssa from the summary LSAs.
Format no area <areaid> nssa no-summary
Mode
area nssa translator-role (OSPF)
This command configures the translator role of the NSSA. A value of always causes the
router to assume the role of the translator the instant it becomes a border router and a value
Router OSPF Config
Router OSPF Config
Router OSPF Config
Router OSPF Config
Router OSPF Config