Utility Commands
532
ProSafe Managed Switch
show logging buffered
This command displays buffered logging (system startup and system operation logs).
Format show logging buffered
Mode
Buffered
(In-Memory)
Logging
Buffered
Logging
Wrapping
Behavior
Buffered Log
Count
show logging hosts
This command displays all configured logging hosts.
Format show logging hosts
Mode
Console
Logging
Severity Filter
The minimum severity to log to the console log. Messages with an equal or lower
numerical severity are logged.
Buffered
Logging
Shows whether buffered logging is enabled.
Syslog Logging
Shows whether syslog logging is enabled.
Log Messages
Received
Number of messages received by the log process. This includes messages that are
dropped or ignored.
Log Messages
Dropped
Number of messages that could not be processed due to error or lack of resources.
Log Messages
Relayed
Number of messages sent to the collector/relay.
Privileged EXEC
Term Definition
Shows whether the In-Memory log is enabled or disabled.
The behavior of the In Memory log when faced with a log full situation.
The count of valid entries in the buffered log.
Privileged EXEC
Term Definition
Host Index
(Used for deleting hosts.)
IP Address /
Hostname
IP address or hostname of the logging host.
Term Definition
To Next Page
Loading...
Need help?
General