IPv6 Multicast Commands
434
ProSafe Managed Switch
ipv6 mld-proxy unsolicit-rprt-interval
Use this command to set the unsolicited report interval for the MLD-Proxy router. This
command is only valid when you enable MLD-Proxy on the interface. The value of <interval>
is 1-260 seconds.
Default 1
Format ipv6 mld-proxy unsolicit-rprt-interval <interval>
Mode
no ipv6 mld-proxy unsolicited-report-interval
Use this command to reset the MLD-Proxy router’s unsolicited report interval to the default
value.
Format no ipv6 mld-proxy unsolicit-rprt-interval
Mode
ipv6 mld-proxy reset-status
Use this command to reset the host interface status parameters of the MLD-Proxy router.
This command is only valid when you enable MLD-Proxy on the interface.
Format ipv6 mld-proxy reset-status
Mode
show ipv6 mld-proxy
Use this command to display a summary of the host interface status parameters.
Format show ipv6 mld-proxy
Mode
• Privileged EXEC
• User EXEC
The command displays the following parameters only when you enable MLD-Proxy.
Interface Config
Interface Config
Interface Config
Field Description
Interface Index
The interface number of the MLD-Proxy.
Admin Mode
Indicates whether MLD-Proxy is enabled or disabled. This is a configured
value.
Operational Mode
Indicates whether MLD-Proxy is operationally enabled or disabled. This is a
status parameter.
Version
The present MLD host version that is operational on the proxy interface.
To Next Page
Loading...
