NETGEAR ProSAFE M7100-24X - User Max-Input-Octets; User Max-Output-Octets; User Max-Total-Octets

Captive Portal Commands
747
ProSafe Managed Switch
no user max-bandwidth-up
Use this command to reset the limit to the default.
Format no user <1-128> max-bandwidth-up
Mode
user max-input-octets
Use this command to limit the number of octets the user is allowed to transmit. After this limit
has been reached the user will be disconnected. <1-128> is the user ID. The range of octets
is 0-4294967295. 0 indicates to use the global limit.
Default 0
Format user <1-128> max-input-octets octets
Mode
no user max-input-octets
Use this command to reset the limit to the default.
Format no user <1-128> max-input-octets
Mode
user max-output-octets
Use this command to limit the number of octets the user is allowed to receive. After this limit
has been reached the user will be disconnected. The <1-128> is the user ID. The range of
the octets is 0 – 4294967295. 0 indicates to use the global limit.
Default 0
Format user <1-128> max-output-octets octets
Mode
no user max-output-octets
Use this command to reset the limit to the default.
Default 0
Format no user <1-128> max-output-octets
Mode
user max-total-octets
Use this command to limit the number of bytes the user is allowed to transmit and receive.
The maximum number of octets is the sum of octets transmitted and received. After this limit
Captive Portal Configuration mode
Captive Portal Configuration mode
Captive Portal Configuration mode
Captive Portal Configuration mode
Captive Portal Configuration mode