Management Commands
629
ProSafe Managed Switch
Management Security Commands
This section describes commands you use to generate keys and certificates, which you can
do in addition to loading them as before.
crypto certificate generate
Use this command to generate self-signed certificate for HTTPS. The generate RSA key for
SSL has a length of 1024 bits. The resulting certificate is generated with a common name
equal to the lowest IP address of the device and a duration of 365 days.
Format crypto certificate generate
Mode
no crypto certificate generate
Use this command to delete the HTTPS certificate files from the device, regardless of
whether they are self-signed or downloaded from an outside source.
Format no crypto certificate generate
Mode
crypto key generate rsa
Use this command to generate an RSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded RSA key files.
Format crypto key generate rsa
Mode
Max SSH
Sessions
Allowed
The maximum number of SSH sessions allowed.
SSH Timeout
The SSH timeout value in minutes.
Keys Present
Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation
in Progress
Indicates whether RSA or DSA key files generation is currently in progress.
Global Config
Global Config
Global Config
Term Definition
To Next Page
Loading...
Need help?
General