Captive Portal Commands
749
ProSafe Managed Switch
Example
(switch)#show captive-portal user
Session Idle
User ID User Name Timeout Timeout Group ID Group Name
------- -------------- -------- -------- -------- -----------
1 user123 10 13 1
Default
2 user234 0 0 1 Default
(switch)#show captive-portal user 1
User ID........................................ 1
User Name...................................... user123
Password Configured............................ Yes
Session Timeout................................ 0
Idle Timeout................................... 0
Max Bandwidth Up (bytes/sec)................... 0
Max Bandwidth Down (bytes/sec)................. 0
Max Input Octets (bytes)....................... 0
Max Output Octets (bytes)...................... 0
Max Total Octets (bytes)....................... 0
Group ID Group Name
-------- --------------------------------
1 Default
2 group2
clear captive-portal users
Use this command to delete all captive portal user entries.
Format clear captive-portal users
Mode
Max Bandwidth
Down (bytes/sec)
Maximum client receive rate (b/s). Limits the bandwidth at which the client can receive
data from the network. If the value is 0 or then use the value configured for the captive
portal.
Max Input Octets
(bytes)
Maximum number of octets the user is allowed to transmit.After this limit has been
reached the user will be disconnected. If the value is 0 then use the value configured
for the captive portal.
Max Output
Octets (bytes)
Maximum number of octets the user is allowed to receive. After this limit has been
reached the user will be disconnected. If the attribute is 0 then use the value
configured for the captive portal.
Max Total Octets
(bytes)
Maximum number of octets the user is allowed to transfer (sum of octets transmitted
and received). After this limit has been reached the user will be disconnected. If the
value is 0 then use the value configured for the captive portal.
Privileged EXEC mode
Term Definition
To Next Page
Loading...
Need help?
General