Switching Commands
85
ProSafe Managed Switch
show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on
the tokens used.
Format show dot1x [{summary {<unit/slot/port> | all} | detail
<unit/slot/port> | statistics <unit/slot/port>]
Mode
If you do not use the optional parameters <unit/slot/port> or <vlanid>, the command
displays the global dot1x mode, the VLAN Assignment mode, and the Dynamic VLAN
Creation mode.
Administrative
Mode
VLAN
Assignment
Mode
Dynamic VLAN
Creation Mode
Monitor Mode
If you use the optional parameter summary {<unit/slot/port> | all}, the dot1x
configuration for the specified port or all ports are displayed.
Interface
Control Mode
Operating
Control Mode
Reauthenticatio
n Enabled
Port Status
Privileged EXEC
Term Definition
Indicates whether authentication control on the switch is enabled or disabled.
Indicates whether assignment of an authorized port to a RADIUS assigned VLAN is
allowed (enabled) or not (disabled).
Indicates whether the switch can dynamically create a RADIUS-assigned VLAN if it does
not currently exist on the switch.
Indicates whether the Dot1x Monitor mode on the switch is enabled or disabled.
Term Definition
The interface whose configuration is displayed.
The configured control mode for this port. Possible values are force-unauthorized |
force-authorized | auto | mac-based | authorized | unauthorized.
The control mode under which this port is operating. Possible values are authorized |
unauthorized.
Indicates whether re-authentication is enabled on this port.
Indicates whether the port is authorized or unauthorized. Possible values are authorized
| unauthorized.
To Next Page
Loading...
Need help?
General