NETGEAR ProSAFE M7100-24X - Ip Domain Timeout; Clear Host

Utility Commands
572
ProSafe Managed Switch
no ip domain retry
Use this command to return to the default.
Format no ip domain retry <number>
Mode
ip domain timeout
Use this command to specify the amount of time to wait for a response to a DNS query. The
parameter <seconds> specifies the time, in seconds, to wait for a response to a DNS query.
<seconds> ranges from 0 to 3600.
Default
Format ip domain timeout <seconds>
Mode
no ip domain timeout
Use this command to return to the default setting.
Format no ip domain timeout <seconds>
Mode
clear host
Use this command to delete entries from the host name-to-address cache. This command
clears the entries from the DNS cache maintained by the software. This command clears
both IPv4 and IPv6 entries.
Format clear host {<name> | all}
Mode
name
all
Global Config
3
Global Config
Global Config
Privileged EXEC
Field Description
A particular host entry to remove. <name> ranges from 1-255 characters.
Removes all entries.