Switching Commands
40
ProSafe Managed Switch
show spanning-tree brief
This command displays spanning tree settings for the bridge. The following information
appears.
Format show spanning-tree brief
Mode
• Privileged EXEC
• User EXEC
Bridge Priority
Bridge Identifier
Bridge Max Age
Bridge Max Hops
Bridge Hello Time
Bridge Forward Delay
Bridge Hold Time
Root Port
Identifier
Identifier of the port to access the Designated Root for the CST
Root Port Max
Age
Derived value.
Root Port
Bridge Forward
Delay
Derived value.
Hello Time
Configured value of the parameter for the CST.
Bridge Hold
Time
Minimum time between transmission of Configuration Bridge Protocol Data Units
(BPDUs).
Bridge Max
Hops
Bridge max-hops count for the device.
CST Regional
Root
Bridge Identifier of the CST Regional Root. It is made up using the bridge priority and the
base MAC address of the bridge.
Regional Root
Path Cost
Path Cost to the CST Regional Root.
Associated
FIDs
List of forwarding database identifiers currently associated with this instance.
Associated
VLANs
List of VLAN IDs currently associated with this instance.
Term Definition
Configured value.
The bridge identifier for the selected MST instance. It is made up using the
bridge priority and the base MAC address of the bridge.
Configured value.
Bridge max-hops count for the device.
Configured value.
Configured value.
Minimum time between transmission of Configuration Bridge Protocol Data
Units (BPDUs).
Term Definition
To Next Page
Loading...
Need help?
General