Routing Commands
291
ProSafe Managed Switch
show ip ospf interface
This command displays the information for the IFO object or virtual interface tables.
Format show ip ospf interface {<unit/slot/port> | loopback <loopback-id> |
vlan <1-4093>}
Mode
• Privileged EXEC
• User EXEC
Type-7 Ext
Total number of Type-7 external LSAs in the database.
Self-Originated
Type-7
Total number of self originated AS external LSAs in the OSPFv3 link state database.
Opaque Link
Number of opaque link LSAs in the database.
Opaque Area
Number of opaque area LSAs in the database.
Subtotal
Number of entries for the identified area.
Opaque AS
Number of opaque AS LSAs in the database.
Total
Number of entries for all areas.
Term Definition
IP Address
The IP address for the specified interface.
Subnet Mask
A mask of the network and host portion of the IP address for the OSPF interface.
Secondary IP
Address(es)
The secondary IP addresses if any are configured on the interface.
OSPF Admin
Mode
States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID
The OSPF Area ID for the specified interface.
OSPF Network
Type
The type of network on this interface that the OSPF is running on.
Router Priority
A number representing the OSPF Priority for the specified interface.
Retransmit
Interval
A number representing the OSPF Retransmit Interval for the specified interface.
Hello Interval
A number representing the OSPF Hello Interval for the specified interface.
Dead Interval
A number representing the OSPF Dead Interval for the specified interface.
LSA Ack
Interval
A number representing the OSPF LSA Acknowledgment Interval for the specified
interface.
Transit Delay
Interval
A number representing the OSPF Transit Delay for the specified interface.
Authentication
Type
The OSPF Authentication Type for the specified interface are: none, simple, and encrypt.
Term Definition
To Next Page
Loading...
Need help?
General