Utility Commands
544
ProSafe Managed Switch
enable password
This command prompts you to change the Privileged EXEC password. Passwords are a
maximum of 64 alphanumeric characters. The password is case sensitive. The option
[encrypted] allows the administrator to transfer the enable password between devices without
having to know the password. In this case, the <password> parameter must be exactly 128
hexadecimal characters.
Format enable password <password> [encrypted]
Mode
logout
This command closes the current telnet connection or resets the current serial connection.
Note: Save configuration changes before logging out.
ping
Use this command to determine whether another computer is on the network. Ping provides
a synchronous response when initiated from the CLI and Web interfaces.
Default
• The default count is 1.
• The default interval is 3 seconds.
• The default size is 0 bytes.
Format ping <ipaddress|hostname> [count <count>] [interval <interval>] [size
<size>]
Modes
• Privileged EXEC
• User EXEC
Privileged EXEC
Format logout
Modes
• Privileged EXEC
• User EXEC
To Next Page
Loading...
