NETGEAR ProSAFE M7100-24X User Manual

Switching Commands
105
ProSafe Managed Switch
lacp admin key
Use this command to configure the administrative value of the key for the port-channel. The
value range of <key> is 0 to 65535.
Default
Format lacp admin key <key>
Mode
Note: This command is only applicable to port-channel interfaces.
no lacp admin key
Use this command to configure the default administrative value of the key for the
port-channel.
Format no lacp admin key
Mode
lacp collector max-delay
Use this command to configure the port-channel collector max delay. The valid range of
<delay> is 0-65535.
Default
Format lacp collector max-delay <delay>
Mode
Note: This command is only applicable to port-channel interfaces.
no lacp collector max delay
Use this command to configure the default port-channel collector max delay.
Format no lacp collector max-delay
Mode
lacp actor admin
Use this command to configure the LACP actor admin parameters.
0x8000
Interface Config
Interface Config
0x8000
Interface Config
Interface Config

NETGEAR ProSAFE M7100-24X Specifications

General

Brand	NETGEAR
Model	ProSAFE M7100-24X
Category	Switch
Language	English