Utility Commands
543
ProSafe Managed Switch
clear counters
This command clears the statistics for a specified <unit/slot/port>, for all the ports, or
for the entire switch based upon the argument.
Format clear counters {<unit/slot/port> | all}
Mode
clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and attempts to
delete these entries from the Multicast Forwarding Database.
Format clear igmpsnooping
Mode
clear pass
This command resets all user passwords to the factory defaults without powering off the
switch. You are prompted to confirm that the password reset should proceed.
Format clear pass
Mode
clear port-channel
This command clears all port-channels (LAGs).
Format clear port-channel
Mode
clear traplog
This command clears the trap log.
Format clear traplog
Mode
clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Format clear vlan
Mode
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
To Next Page
Loading...
Need help?
General