NETGEAR ProSAFE M7100-24X - Vlan Port Tagging All; Vlan Protocol Group; Vlan Protocol Group Name

Switching Commands
52
ProSafe Managed Switch
vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
Format vlan port tagging all <1-4093>
Mode
no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format no vlan port tagging all
Mode
vlan protocol group
This command adds protocol-based VLAN groups to the system. When it is created, the
protocol group will be assigned a unique number (1-128) that will be used to identify the
group in subsequent commands.
Format vlan protocol group <1-128>
Mode
no vlan protocol group
This command removes a protocol group.
Format no vlan protocol group <1-128>
Mode
vlan protocol group name
This command assigns a name to a protocol-based VLAN groups. The groupname variable
can be a character string of 0 to 16 characters.
Format vlan protocol group name <1-128> <groupname>
Mode
Global Config
Global Config
Global Config
Global Config
Global Config