NETGEAR ProSAFE M7100-24X - Lldp Med All; Lldp Med Confignotification All

Switching Commands
182
ProSafe Managed Switch
Note: The current implementation supports one network policy: the voice
VLAN as defined by the voice vlan commands.
no lldp med transmit-tlv
Use this command to remove a TLV.
Format no lldp med transmit-tlv [capabilities] [network-policy] [ex-pse]
[ex-pd] [location] [inventory]
Mode
lldp med all
Format lldp med all
Mode
Use this command to configure LLDP-MED on all the ports
no lldp med all
Use this command to remove LLDP-MD on all ports.
Format no lldp med all
Mode
lldp med confignotification all
U
Format lldp med confignotification all
Mode
se this command to configure all the ports to send the topology change notification.
ex-pse
Transmit the LLDP extended PSE TLV.
inventory
Transmit the LLDP inventory TLV.
location
Transmit the LLDP location TLV.
network-policy
Transmit the LLDP network policy TLV.
Interface Config
Global Config
Global Config
Global Config
Term Definition