Switching Commands
106
ProSafe Managed Switch
lacp actor admin key
Use this command to configure the administrative value of the LACP actor admin key. The
valid range for <key> is 0-65535.
Default
Format lacp actor admin key <key>
Mode
Note: This command is only applicable to physical interfaces.
no lacp actor admin key
Use this command to configure the default administrative value of the key.
Format no lacp actor admin key
Mode
lacp actor admin state individual
Use this command to set LACP actor admin state to individual.
Format lacp actor admin state individual
Mode
Note: This command is only applicable to physical interfaces.
no lacp actor admin state individual
Use this command to set the LACP actor admin state to aggregation.
Format no lacp actor admin state individual
Mode
lacp actor admin state longtimeout
Use this command to set LACP actor admin state to longtimeout.
Format lacp actor admin state longtimeout
Mode
Internal Interface Number of this Physical Port
Interface Config
Interface Config
Interface Config
Interface Config
Interface Config
To Next Page
Loading...
