IPv6 Multicast Commands
423
ProSafe Managed Switch
(Switch) #show ipv6 pim interface 1/0/1
Interface...................................... 1/0/1
Mode........................................... Dense
Hello Interval (secs).......................... 30
Join Prune Interval (secs)..................... 60
DR Priority.................................... 1
BSR Border..................................... Disabled
ipv6 pim bsr-border
Use this command to prevent bootstrap router (BSR) messages from being sent or received
through an interface.
Default
Format ipv6 pim bsr-border
Mode
no ipv6 pim bsr-border
Use this command to disable the interface from being the BSR border.
Format no ipv6 pim bsr-border
Mode
ipv6 pim bsr-candidate
Use this command to configure the router to announce its candidacy as a bootstrap router
(BSR).
Default
Format ipv6 pim bsr-candidate interface [<unit/slot/port> | vlan <1-4093>]
[hash-mask-length] [priority] [interval interval]
Mode
Neighbor Count
Number of PIM neighbors discovered on the interface. This field is displayed only
when the interface is operational.
Designated-Router
IP address of the elected DR on the interface. This field is displayed only when the
interface is operational.
disabled
Interface Config
Interface Config
None
Global Config
Term Definition
To Next Page
Loading...
Need help?
General