NETGEAR ProSAFE M7100-24X User Manual

Utility Commands
611
ProSafe Managed Switch
udld port
This command selects the UDLD mode operating on this interface. If the keyword
“aggressive” is not entered, the port operates in normal mode.
Default
Format udld port [aggressive]
Mode
udld reset
This command resets all interfaces that have been shutdown by UDLD.
Format udld reset
Mode
show udld
This command displays the global settings of UDLD.
Format show udld
Mode
Admin Mode
Message
Interval
Timeout Interval
show udld <slot/port>
This command displays the UDLD settings for the specified <slot/port>. If the “all” keyword is
entered, it displays information for all ports.
Format show udld {< unit/slot/port> | all }
Mode
• Privileged EXEC
• User EXEC
normal
Interface Config
Privileged EXEC
Privileged EXEC
Term Definition
The global administrative mode of UDLD.
The time period (in seconds) between the transmission of UDLD probe packets.
The time period (in seconds) before making decision that link is unidirectional.
Term Definition
Unit/Slot/Port
The identifying <unit/slot/port> of the interface.
Admin Mode
The administrative mode of UDLD configured on this interface. This is either “Enabled” or
“Disabled”.

NETGEAR ProSAFE M7100-24X Specifications

General

Brand	NETGEAR
Model	ProSAFE M7100-24X
Category	Switch
Language	English