NETGEAR ProSAFE M7100-24X - Ip Rip; Default-Information Originate (Rip)

Routing Commands
308
ProSafe Managed Switch
ip rip
This command enables RIP on a router interface.
Default
Format ip rip
Mode
no ip rip
This command disables RIP on a router interface.
Format no ip rip
Mode
auto-summary
This command enables the RIP auto-summarization mode.
Default
Format auto-summary
Mode
no auto-summary
This command disables the RIP auto-summarization mode.
Format no auto-summary
Mode
default-information originate (RIP)
This command is used to control the advertisement of default routes.
Format default-information originate
Mode
no default-information originate (RIP)
This command is used to control the advertisement of default routes.
Format no default-information originate
Mode
disabled
Interface Config
Interface Config
disabled
Router RIP Config
Router RIP Config
Router RIP Config
Router RIP Config