Management Commands
636
ProSafe Managed Switch
ip http secure-protocol
Use this command to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.
Default
Format ip http secure-protocol [SSL3] [TLS1]
Mode
show ip http
Use this command to display the http settings for the switch.
Format show ip http
Mode
HTTP Mode (Unsecure)
Java Mode
Maximum Allowable HTTP
Sessions
HTTP Session Hard
Timeout
HTTP Session Soft
Timeout
HTTP Mode (Secure)
Secure Port
Secure Protocol Level(s)
Maximum Allowable
HTTPS Sessions
HTTPS Session Hard
Timeout
HTTPS Session Soft
Timeout
Certificate Present
Certificate Generation in
Progress
SSL3 and TLS1
Privileged EXEC
Privileged EXEC
Term Definition
The unsecure HTTP server administrative mode.
The java applet administrative mode which applies to both secure and
un-secure web connections.
The number of allowable un-secure http sessions.
The hard timeout for un-secure http sessions in hours.
The soft timeout for un-secure http sessions in minutes.
The secure HTTP server administrative mode.
The secure HTTP server port number.
The protocol level may have the values of SSL3, TSL1, or both SSL3 and
TSL1.
The number of allowable secure http sessions.
The hard timeout for secure http sessions in hours.
The soft timeout for secure http sessions in minutes.
Indicates whether the secure-server certificate files are present on the device.
Indicates whether certificate generation is currently in progress.
To Next Page
Loading...
Need help?
General