EasyManua.ls Logo

NETGEAR ProSAFE M7100-24X - Ip Igmp-Proxy Unsolicit-Rprt-Interval; Ip Igmp-Proxy Reset-Status; Show Ip Igmp-Proxy

NETGEAR ProSAFE M7100-24X
776 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IP Multicast Commands
346
ProSafe Managed Switch
ip igmp-proxy unsolicit-rprt-interval
This command sets the unsolicited report interval for the IGMP Proxy router. This command
is valid only when you enable IGMP Proxy on the interface. The value of <interval> can
be 1-260 seconds.
Default
Format ip igmp-proxy unsolicit-rprt-interval <interval>
Mode
no ip igmp-proxy unsolicit-rprt-interval
This command resets the unsolicited report interval of the IGMP Proxy router to the default
value.
Format no ip igmp-proxy unsolicit-rprt-interval
Mode
ip igmp-proxy reset-status
This command resets the host interface status parameters of the IGMP Proxy router. This
command is valid only when you enable IGMP Proxy on the interface.
Format ip igmp-proxy reset-status
Mode
show ip igmp-proxy
This command displays a summary of the host interface status parameters. It displays the
following parameters only when you enable IGMP Proxy.
Format show ip igmp-proxy
Modes
• Privileged EXEC
• User EXEC
1
Interface Config
Interface Config
Interface Config
Term Definition
Interface index
The interface number of the IGMP Proxy.
Admin Mode
States whether the IGMP Proxy is enabled or not. This is a configured value.
Operational
Mode
States whether the IGMP Proxy is operationally enabled or not. This is a status
parameter.
Version
The present IGMP host version that is operational on the proxy interface.

Table of Contents

Other manuals for NETGEAR ProSAFE M7100-24X

Related product manuals