Utility Commands
529
ProSafe Managed Switch
logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Default
Format logging buffered
Mode
no logging buffered
This command disables logging to in-memory log.
Format no logging buffered
Mode
logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default
Format logging buffered wrap
Mode
no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop when
the log file capacity is full.
Format no logging buffered wrap
Mode
logging cli-command
This command enables the CLI command logging feature, which enables the 7000 series
software to log all CLI commands issued on the system.
Default
Format logging cli-command
Mode
disabled; critical when enabled
Global Config
Global Config
enabled
Privileged EXEC
Privileged EXEC
enabled
Global Config
To Next Page
Loading...
Need help?
General