Utility Commands
571
ProSafe Managed Switch
ip host
Use this command to define static host name-to-address mapping in the host cache. <name>
is host name. <ip address> is the IP address of the host.
Default
Format ip host <name> <ipaddress>
Mode
no ip host
Use this command to remove the name-to-address mapping.
Format no ip host <name>
Mode
ipv6 host
Use this command to define static host name-to-IPv6 address mapping in the host cache.
<name> is host name. <v6 address> is the IPv6 address of the host.
Default
Format ipv6 host <name> <v6 address>
Mode
no ipv6 host
Use this command to remove the static host name-to-IPv6 address mapping in the host
cache.
Format no ipv6 host <name>
Mode
ip domain retry
Use this command to specify the number of times to retry sending Domain Name System
(DNS) queries. The parameter <number> indicates the number of times to retry sending a
DNS query to the DNS server. This number ranges from 0 to 100.
Default
Format ip domain retry <number>
Mode
none
Global Config
Global Config
none
Global Config
Global Config
2
Global Config
To Next Page
Loading...
