Management Commands
617
ProSafe Managed Switch
A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
Format network mac-address <macaddr>
Mode
network mac-type
Use this command to specify whether the switch uses the burned in MAC address or the
locally-administered MAC address.
Default
Format network mac-type {local | burnedin}
Mode
no network mac-type
Use this command to reset the value of MAC address to its default.
Format no network mac-type
Mode
network javamode
Use this command to specify whether or not the switch should allow access to the Java
applet in the header frame of the Web interface. When access is enabled, the Java applet
can be viewed from the Web interface. When access is disabled, the user cannot view the
Java applet.
Default
Format network javamode
Mode
no network javamode
Use this command to disallow access to the Java applet in the header frame of the Web
interface. When access is disabled, the user cannot view the Java applet.
Format no network javamode
Mode
show network
Use this command to display configuration settings associated with the switch’s network
interface. The network interface is the logical interface used for in-band connectivity with the
switch via any of the switch's front panel ports. The configuration parameters associated with
Privileged EXEC
burnedin
Privileged EXEC
Privileged EXEC
enabled
Privileged EXEC
Privileged EXEC
To Next Page
Loading...
Need help?
General