Utility Commands
600
ProSafe Managed Switch
IP Address:.................................... 0.0.0.0
Address Type................................... 1
Port........................................... 6343
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
show sflow samplers
Use this command to display the sFlow sampling instances created on the switch.
Format show sflow samplers
Mode
Software License Commands
License commands allow you to configure advanced features on some layer2 managed
switches. The following table lists the software license matrix for the layer2 managed
switches. For details, see Licensing and Command Support on page 8.
Managed Switches
Note: The software license allows the user to download a license file only
on the Master unit. The file cannot be downloaded on a Slave unit.
There are two options to download the license file to the switch:
• Use the Copy command to download the license file through the CLI.
• Go to the Maintenance > Download page to download the licence file through the GUI.
Privileged EXEC
Field Description
Sampler Data
Source
The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical
ports only.
Receiver Index
The sFlowReceiver configured for this sFlow sampler.
Packet
Sampling Rate
The statistical sampling rate for packet sampling from this source.
Max Header
Size
The maximum number of bytes that should be copied from a sampled packet to form a
flow sample.
Switch IPv4 Routing IPv6 Routing IP Multicast
Licensed Licensed Licensed
To Next Page
Loading...
Need help?
General