NETGEAR ProSAFE M7100-24X - Spanning-Tree Bpdufilter Default; Spanning-Tree Bpduflood

Switching Commands
30
ProSafe Managed Switch
no spanning-tree bpdufilter
Use this command to disable BPDU Filter on the interface or range of interfaces.
Default
Format no spanning-tree bpdufilter
Mode
spanning-tree bpdufilter default
Use this command to enable BPDU Filter on all the edge port interfaces.
Default
Format spanning-tree bpdufilter
Mode
no spanning-tree bpdufilter default
Use this command to disable BPDU Filter on all the edge port interfaces.
Default
Format no spanning-tree bpdufilter default
Mode
spanning-tree bpduflood
Use this command to enable BPDU Flood on the interface.
Default
Format spanning-tree bpduflood
Mode
no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface.
Format no spanning-tree bpduflood
Mode
disabled
Interface Config
disabled
Global Config
enabled
Global Config
disabled
Interface Config
Interface Config