Utility Commands
566
ProSafe Managed Switch
clear ip dhcp server statistics
This command clears DHCP server statistics counters.
Format clear ip dhcp server statistics
Mode
clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The
server detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*)
character is used as the address parameter.
Default
Format clear ip dhcp conflict {<address> | *}
Mode
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If
no IP address is specified, the bindings corresponding to all the addresses are displayed.
Format show ip dhcp binding [<address>]
Modes
• Privileged EXEC
• User EXEC
IP address
Hardware
Address
Lease
expiration
Type
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If
no IP address is specified, the bindings corresponding to all the addresses are displayed.
Format show ip dhcp global configuration
Modes
• Privileged EXEC
• User EXEC
Privileged EXEC
none
Privileged EXEC
Term Definition
The IP address of the client.
The MAC Address or the client identifier.
The lease expiration time of the IP address assigned to the client.
The manner in which IP address was assigned to the client.
To Next Page
Loading...
Need help?
General