Management Commands
632
ProSafe Managed Switch
user will be forced to re-authenticate. This timer begins on initiation of the web session and is
unaffected by the activity level of the connection.
Format ip http session hard-timeout <0-168>
Mode
no ip http session hard-timeout
Use this command to restore the hard timeout for un-secure HTTP sessions to the default
value.
Format no ip http session hard-timeout
Mode
ip http authentication
Use this command to specify the authentication methods for http server users. The additional
methods of authentication are used only if the previous method returns an error, not if it fails.
To ensure that the authentication succeeds even if all methods return an error, specify none
as the final method in the command line. For example If none specified as an authentication
method after radius, no authentication is used if the radius server is down.
Format ip http authentication method1 [method2 ...]
Mode
Local
Radius
Tacacs
None
no ip http authentication
Use this command to restore the authentication methods to the default.
Format no ip http authentication method1 [method2 ...]
Mode
Default 24
Privileged EXEC
Privileged EXEC
Global ConfigC
Term Definition
Uses the local username database for authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS servers for authentication.
Uses no authentication.
Global Config
To Next Page
Loading...
Need help?
General