Login Time
Username
Protocol
Location
Management Commands
643
ProSafe Managed Switch
passwords min-length
Use this command to enforce a minimum password length for local users. The value also
applies to the enable password. The valid range is 0-64.
Default
Format passwords min-length <0-64>
Mode
no passwords min-length
Use this command to set the minimum password length to the default value.
Format no passwords min-length
Mode
passwords history
Use this command to set the number of previous passwords that shall be stored for each
user account. When a local user changes his or her password, the user will not be able to
reuse any password stored in password history. This ensures that users don’t reuse their
passwords often. The valid range is 0-10.
Default
Format passwords history <0-10>
Mode
no passwords history
Use this command to set the password history to the default value.
Format no passwords history
Mode
Term Definition
The time at which the user logged in.
The user name used to login.
The protocol that the user used to login.
The location of the user.
8
Global Config
Global Config
0
Global Config
Global Config
To Next Page
Loading...
Need help?
General