NETGEAR ProSAFE M7100-24X - Set Igmp Mrouter

Switching Commands
150
ProSafe Managed Switch
interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0
indicates an infinite time-out, i.e. no expiration.
Default
Format set igmp mcrtrexpiretime <0-3600>
Mode
• Global Config
• Interface Config
Format set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the
system, on a particular interface or a VLAN.
Format no set igmp mcrtrexpiretime
Mode
• Global Config
• Interface Config
Format no set igmp mcrtrexpiretime <vlan_id>
Mode
set igmp mrouter
This command configures the VLAN ID (<vlanId>) that has the multicast router mode
enabled.
Format set igmp mrouter <vlan_id>
Mode
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (<vlan_id>).
Format no set igmp mrouter <vlan_id>
Mode
0
VLAN Config
VLAN Config
Interface Config
Interface Config