Siemens sinamics dcp - r2130[0...63] Fault time received in days; t_fault recv days; r2131 CO: Actual fault code; Act fault code; r2132 CO: Actual alarm code; Actual alarm code; r2133[0...63] Fault value for float values; Fault val float

SINAMICS DCP
List Manual (LH21), 05/2016
109
2 Parameters
2.2 List of parameters
Description: Displays the system runtime in days when the fault occurred.
Dependency: Refer to: r0945, r0947, r0948, r0949, r2109, r2114, r2133, r2136, r3115, r3120, r3122
Notice: The time comprises r2130 (days) and r0948 (milliseconds).
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
Description: Displays the code of the oldest active fault.
Dependency: Refer to: r3131, r3132
Note: 0: No fault present.
Description: Displays the code of the last alarm that occurred.
Note: 0: No alarm present.
Description: Displays additional information about the fault that occurred for float values.
Dependency: Refer to: r0945, r0947, r0948, r0949, r2109, r2130, r2136, r3115
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
Description: Displays additional information about the active alarm for float values.
Dependency: Refer to: r2110, r2122, r2123, r2124, r2125, r2145, r2146, r3121, r3123
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
Description: Display and BICO output for the second status word of faults and alarms.
r2130[0...63] Fault time received in days / t_fault recv days
All objects Can be changed: - Access level: 3
Data type: Unsigned16 Func. diagram: 8060
Min Max Factory setting
- - -
r2131 CO: Actual fault code / Act fault code
All objects Can be changed: - Access level: 3
Data type: Unsigned16 Func. diagram: 8060
Min Max Factory setting
- - -
r2132 CO: Actual alarm code / Actual alarm code
All objects Can be changed: - Access level: 3
Data type: Unsigned16 Func. diagram: 8065
Min Max Factory setting
- - -
r2133[0...63] Fault value for float values / Fault val float
All objects Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: 8060
Min Max Factory setting
- - -
r2134[0...63] Alarm value for float values / Alarm value float
All objects Can be changed: - Access level: 3
Data type: FloatingPoint32 Func. diagram: 8065
Min Max Factory setting
- - -
r2135.0...2 CO/BO: Status word faults/alarms 2 / ZSW fault/alarm 2
CU_DCP Can be changed: - Access level: 2
Data type: Unsigned16 Func. diagram: 2548
Min Max Factory setting
- - -
Siemens Parts